iTopSpin

Please login or register.

Login with username, password and session length
Advanced search  

News:

Author Topic: Journey to Spintastics' trick patches  (Read 387 times)

MarkusB

  • Newbie
  • *
  • Posts: 4
Journey to Spintastics' trick patches
« on: March 01, 2021, 03:33:05 PM »

Hello everyone,

maybe I start with a short introduction since I am new here. After Youtube decided to show me some amazing top spinning videos I got totally intrigued by them and shortly after picked up the Yoyofactory short circuit and elec-trick. I am having a lot of fun with them and already got some tricks down. At some point I would like to apply for the Spintastics trick patches and got a Trompo Grande for that. Maybe I need to revise that goal but I was hoping to do all the tricks with that top eventually, à la Chris Neff

https://www.youtube.com/watch?v=pL74JEP934U

and hope to use this post and your help (and wisdom  :)) to get there.

So here is my first actual question:
I am quite confident doing the wire walker with the short circuit, but the Trompo Grande just does not want to do it. It seems like the string that came with the top is too stiff to have the top walk the string. I was wondering if it will wear in eventually or if I need to get a different one. Is that a common problem?

Best,
Markus
« Last Edit: March 01, 2021, 04:25:03 PM by ta0 »
Logged

Larry D.

  • Hyperhero member
  • ********
  • Posts: 1350
Re: Journey to Spintastics' trick patches
« Reply #1 on: March 01, 2021, 04:04:26 PM »

Welcome MarkusB,

I hate to ask the obvious but,.....
Is your Trompo Grande a FIXED TIP model (not the BEARING Model).
Bearing tops are not used for Wirewalkers.
Logged

MarkusB

  • Newbie
  • *
  • Posts: 4
Re: Journey to Spintastics' trick patches
« Reply #2 on: March 01, 2021, 05:02:24 PM »

Hi Larry D.,

no worries rooting out the obvious first. I am using a model with a fixed tip.

When I attempt the wirewalker I can manage to get the top move a bit, maybe 1-2" before it stops and gets stuck. I tried different amounts of tension but I had no luck with that.
Logged

ta0

  • Administrator
  • Olympus member
  • *****
  • Posts: 12234
    • www.ta0.com
Re: Journey to Spintastics' trick patches
« Reply #3 on: March 01, 2021, 05:37:30 PM »

I suspect your Trompo Grande does not have the original Spintastics tip with a thick neck but the diabolo tip with a thin neck.
The original tip wire-walks fast. But the diabolo tip walks quite slowly and with a stiff string it might not walk at all.

Welcome to the forum and the hobby!
Logged

MarkusB

  • Newbie
  • *
  • Posts: 4
Re: Journey to Spintastics' trick patches
« Reply #4 on: March 01, 2021, 06:19:44 PM »

ta0, you make a good point. I had not thought about the tip at all when I tried to troubleshoot. I do have a diabolo tip with a neck that is even narrower than on the short circuit and I can understand now why it is problematic for the wirewalker
a) small radius bends string more, adding friction where it is not wanted
b) there is less friction between tip and rope because of small cricumference
c) small radius makes it less efficient to transform the tip/string friction into the "walking"

Is there any advantage of a diabolo tip in your experience? I am still far away from regeneration tricks but it seems to me that this tip would not be favorable here for the same reasons.
« Last Edit: March 01, 2021, 06:22:43 PM by MarkusB »
Logged

ta0

  • Administrator
  • Olympus member
  • *****
  • Posts: 12234
    • www.ta0.com
Re: Journey to Spintastics' trick patches
« Reply #5 on: March 01, 2021, 09:20:04 PM »

Mystery solved!  :)

The low friction of the diabolo tip is an advantage for non-wire-walking tricks compared to the standard Spintastics fixed tip. Of course, a bearing tip would be even better in that regard. But, long term, playing with fixed tip advances your skill faster.
Logged

ta0

  • Administrator
  • Olympus member
  • *****
  • Posts: 12234
    • www.ta0.com
Re: Journey to Spintastics' trick patches
« Reply #6 on: March 01, 2021, 11:54:29 PM »

I'm thinking that now that Spintastics has closed, we may need to stop requiring a Spintastics top for this patch. I don't know if Dale still has actual embroidered patches to give out. But we can still keep the design for the virtual patches and the Spintastics name.
Logged

Texture

  • ITSA
  • Hero Member
  • *****
  • Posts: 332
  • Split that top!
Re: Journey to Spintastics' trick patches
« Reply #7 on: March 02, 2021, 12:01:47 AM »

Welcome to the forum, I agree that diabolo tips make slow wirewalkers. Either you have to do a very hard boomerang, or you'll have to kind of lift the string on the side that you start the top. Diabolo tips are also better for regeneration tricks.
Logged
ok

Mermouy

  • ITSA Jr.
  • Hero Member
  • *****
  • Posts: 370
  • Spintop lover, spinning since 2015...
    • Spintop Tips and Tricks
Re: Journey to Spintastics' trick patches
« Reply #8 on: March 02, 2021, 05:55:28 AM »

Welcome aboard!
In case you didn't catch them all: Here are all (I know about) patches video application you can filter them on top of the portfolio...
Logged

the Earl of Whirl

  • ITSA Jr.
  • Olympus member
  • ***********
  • Posts: 7327
    • St. Jacob Lutheran with a tops page
Re: Journey to Spintastics' trick patches
« Reply #9 on: March 02, 2021, 06:49:51 PM »

It is great to welcome MarkusB to our forum.  It is exciting to hear of your progress.  It is also exciting to see Larry D. give you a hearty welcome.  I have missed him!!!

There seems to be something special about the name Markus and spin tops.
Logged
Happiness runs in a circular motion!!!

MarkusB

  • Newbie
  • *
  • Posts: 4
Re: Journey to Spintastics' trick patches
« Reply #10 on: March 04, 2021, 02:07:16 PM »

Thanks for all the welcoming messages.

I am getting more familiar throwing the trompo grande and with more spin and lifting the arm I am able to force to top over to the other side. It is not pretty but it is something I can build on.

Is there a way to make the string softer? I still think the stiffness is a major problem for me. I tried to pull it over the edge of my table a couple of times but I am not sure if that really helps or just damages the string.

Quote
now that Spintastics has closed
I was surprised to hear that. The website says they joined with Yoyoplay. Does anyone know what that means and whether there will be more spin tops (maybe under a different name)?
Logged

ta0

  • Administrator
  • Olympus member
  • *****
  • Posts: 12234
    • www.ta0.com
Re: Journey to Spintastics' trick patches
« Reply #11 on: March 04, 2021, 02:38:32 PM »

You can get regular cotton string from many places (e.g. Home Depot) and it will be softer. It will probably help you wire walking with that tip, but generally the firmer string from Spintastics is better for top playing.

Yoyoplay acquired the yo-yo and diabolo lines from Spintastics, but not the spintop line. Just a few months ago Dale and Val sold their remaining stock of tops to YoyoSam and closed the business. I think Val still does the Science of Spin program but Dale is fully retired.

Logged

Texture

  • ITSA
  • Hero Member
  • *****
  • Posts: 332
  • Split that top!
Re: Journey to Spintastics' trick patches
« Reply #12 on: March 04, 2021, 03:00:04 PM »

From what I have heard some spintastics tops are still being made - but they are sold through yoyosam. You can also get them on yoyosam amazon, yoyosam eBay, and yoyoplay still has some. I also believe spintastics yoyos (aka SCIENCE of SPIN yoyos) are still made and sold on scienceofspin.com, and some on yoyosam.com. It just plain sucks that you can't get Quicksiver Hybrid tops anywhere now, though....  :( >:( :-\ :'(
Logged

the Earl of Whirl

  • ITSA Jr.
  • Olympus member
  • ***********
  • Posts: 7327
    • St. Jacob Lutheran with a tops page
Re: Journey to Spintastics' trick patches
« Reply #13 on: March 04, 2021, 08:29:15 PM »

Hmmm.  I did not know they sold their remaining stock of tops to YoYoSam!!!  That is great.
Logged