iTopSpin

Please login or register.

Login with username, password and session length
Advanced search  

News:

Author Topic: LEGO tops  (Read 3097 times)

Jeremy McCreary

  • ITSA
  • Demigod member
  • **********
  • Posts: 3584
    • MOCpages
LEGO tops
« on: March 01, 2016, 04:55:00 AM »

Hi,

Writing this first post on iTopSpin to share the all-LEGO finger tops I've uploaded at http://www.moc-pages.com/folder.php/188421. Here's one I call the "Blacktron Chamberlain-class Capitulator" as a spoof on the grandiose names often given to the LEGO spaceship models posted on MOCpages:



The tops on display at the link above represent about 20% of my collection, which now includes well over 300 distinct structural designs. Many of these tops fall far outside the box WRT conventional top designs. The physics of tops (rigid body dynamics) and mechanical engineering principles (to ensure structural integrity at speed) guide all of my designs, but I also pay close attention to esthetics, both at rest and in motion.

I especially enjoy designing tops that either (i) interact with room lighting to produce interesting visual effects, like so...

https://www.youtube.com/watch?v=2iPfv1vQhk4

... or (ii) incorporate moving parts that change configuration under centrifugal force to produce interesting mechanical behaviors, like these...

https://www.youtube.com/watch?v=jEMUGFQTux0

Some of my LEGO tops spin over 150 sec by hand and longer with various LEGO spin-up tools like the multi-stage planetary spinner below:



Hand-twirled release speeds of 500 to 1,500 RPM are common, and aerodynamically clean tops can exceed 4,000 RPM with a motorized spinner. Release speeds and spin times are generally limited by air resistance, tip friction, and axial moment of inertia.

I'm sure that the tops usually discussed on this forum outperform mine in every way, but these spin times and release speeds are pretty good considering (i) that LEGO's proprietary ABS plastic is only 5% denser than water, and (ii) that LEGO structures typically include a lot of air.

I've made use of a wide variety of studded and studless LEGO parts and some rather novel building techniques as well.

Andromeda (studded construction):


Tank Top (rotor ring from inverted tank treads):


Since LEGO parts have tolerances of better than 1 part in 10,000, static balance is guaranteed for any symmetrical arrangement of parts about the spin axis. And since the plastic strongly resists centrifugal stresses at attainable speeds, well-designed rotor and tip assemblies are rigid enough to insure dynamic balance as well.

Any and all feedback appreciated.

Jeremy McCreary

« Last Edit: March 01, 2016, 05:48:45 PM by Jeremy McCreary »
Logged
Everything in the world is strange and marvelous to well-open eyes. -- Jose Ortega y Gasset

Dick Stohr

  • ITSA
  • Hyperhero member
  • ********
  • Posts: 1230
Re: LEGO tops
« Reply #1 on: March 01, 2016, 09:20:46 AM »

Very, very interesting, well done and welcome to this forum.
Logged
Practice hard and play safe.

ta0

  • Administrator
  • Olympus member
  • *****
  • Posts: 13220
    • www.ta0.com
Re: LEGO tops
« Reply #2 on: March 01, 2016, 11:39:31 AM »

Wow Jeremy! Very, very impressive work! 8)
And I love your explanations (I just skimmed through your detail comparison between your Andromeda top and the actual galaxy  :o )!

It is going to take me a while to go through your website and absorb all what you have there.
To embed youtube videos, just place the URL address on your post (but not the mobile type address). That is all it is needed.
To embed an image, read this post: http://www.ta0.com/forum/index.php/topic,2210.0.html
I'll edit your original post so you can see two examples.

Welcome to the forum!!!

Logged

jim in paris

  • ITSA
  • Demigod member
  • **********
  • Posts: 3674
  • "oeuvre de coeur prend tout un homme
    • my vids on  youtube
Re: LEGO tops
« Reply #3 on: March 01, 2016, 12:07:53 PM »

salut Jeremy

thanx for sharing your works with lego spintops
your skills are incredible
you are very welcome here ! :D
and also if you could make it to one of the spintop dates/events
that would be great
like Jorge,  I have to discover your website

cheers
jim
Logged
"oeuvre de coeur prend tout un homme"

Jack

  • Demigod member
  • **********
  • Posts: 3380
Re: LEGO tops
« Reply #4 on: March 01, 2016, 03:59:50 PM »

welcome home sir @-@
your creations are most impressive @-@
Logged

Jeremy McCreary

  • ITSA
  • Demigod member
  • **********
  • Posts: 3584
    • MOCpages
Re: LEGO tops
« Reply #5 on: March 01, 2016, 05:42:12 PM »

Thanks to all for the warm welcome and kind words!

I'll check the calendar for any upcoming spintop events near me (Denver, CO).

Thanks especially to ta0 for showing me how to embed images and videos. I applied the lesson to the original post.
Logged

the Earl of Whirl

  • ITSA
  • Olympus member
  • ***********
  • Posts: 7746
    • St. Jacob Lutheran with a tops page
Re: LEGO tops
« Reply #6 on: March 01, 2016, 09:42:33 PM »

Those are some fun Lego tops.  I have a few Lego tops in my garage (the Top Spinning Hall of Fame) but they are very simple things compared to what you have made.  I like the ideas and will work on some of them.  Some of the pieces you have are the kinds of things I am not familiar with.  I will have to do some research.
Logged
Happiness runs in a circular motion!!!

Jeremy McCreary

  • ITSA
  • Demigod member
  • **********
  • Posts: 3584
    • MOCpages
Re: LEGO tops
« Reply #7 on: March 02, 2016, 02:00:00 AM »

Many thanks, EW! Looking forward to seeing what you come up with.

One of my goals in joining iTopSpin is to learn everything I can from the vast expertise and experience assembled here. The other is to become an immortal demigod.
Logged

the Earl of Whirl

  • ITSA
  • Olympus member
  • ***********
  • Posts: 7746
    • St. Jacob Lutheran with a tops page
Re: LEGO tops
« Reply #8 on: July 30, 2022, 11:16:51 AM »

The paper is reporting there will be a Lego convention in downtown Dayton on August 6th and 7th.  They are promising quite a good time.  Do you know much about Brickuniverse, Jeremy?  They are calling the event “Lego Fan Expo.”
Logged

Jeremy McCreary

  • ITSA
  • Demigod member
  • **********
  • Posts: 3584
    • MOCpages
Re: LEGO tops
« Reply #9 on: July 30, 2022, 01:51:30 PM »

The paper is reporting there will be a Lego convention in downtown Dayton on August 6th and 7th.  They are promising quite a good time.  Do you know much about Brickuniverse, Jeremy?  They are calling the event “Lego Fan Expo.”

No experience with conventions run by this company, but you'll probably have fun. You'll certainly see things done with LEGO that you never imagined or thought possible.

Probably not likely to see LEGO tops there. But if you do, please give the makers my regards. They can find my YouTube channel (lots of tops) by searching on my full name, "Jeremy McCreary", or on "Technical LEGO".
« Last Edit: July 30, 2022, 01:55:52 PM by Jeremy McCreary »
Logged

the Earl of Whirl

  • ITSA
  • Olympus member
  • ***********
  • Posts: 7746
    • St. Jacob Lutheran with a tops page
Re: LEGO tops
« Reply #10 on: July 31, 2022, 05:02:23 PM »

Today’s paper says in the headline “Fan’s expectations building for Lego convention in Dayton.”  Highlights for the event will be a fan zone, a Star Wars zone, a building zone and Lego retail.  The article also mentions some professionals who will be there.  Does anyone know Jonathan Lopes from San Diego?  Or how about Rocco Buttliere from Chicago?
Logged

Jeremy McCreary

  • ITSA
  • Demigod member
  • **********
  • Posts: 3584
    • MOCpages
Re: LEGO tops
« Reply #11 on: August 01, 2022, 04:08:20 AM »

Unfamiliar with these pros and their work, but I see that Lopes has a Wikipedia page.

Many LEGO fans are really into Star Wars builds, so no surprise that it gets its own zone. But you'll probably find many other kinds of builds in the fan zone -- maybe even some big train layouts.
Logged

Jeremy McCreary

  • ITSA
  • Demigod member
  • **********
  • Posts: 3584
    • MOCpages
Re: LEGO tops
« Reply #12 on: August 01, 2022, 09:33:31 AM »

Per one of my fellow LUG (LEGO user group) members...

Quote
Brick Universe is an Expo where your timed tickets allow you to go through and look at models of invited artists and sometimes local LUGs. Most of the artists are top builders.
Logged

the Earl of Whirl

  • ITSA
  • Olympus member
  • ***********
  • Posts: 7746
    • St. Jacob Lutheran with a tops page
Re: LEGO tops
« Reply #13 on: August 06, 2022, 04:02:00 PM »

Paul Hetherington had a great Pac Man!!!

Logged

Jeremy McCreary

  • ITSA
  • Demigod member
  • **********
  • Posts: 3584
    • MOCpages
Re: LEGO tops
« Reply #14 on: August 06, 2022, 04:19:53 PM »

Wow, he did a great job. If anything else catches your fancy, please share!
Logged