Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[topper777]

i just got a couple of 1 way beari ngs. i cant figure out how to put them in. does anyone have a diagram. oh, and im a lefty.

[bAd]

Hi, the diagram below shows how you're supposed to assemble the whole tip.
You should have found a very small washer in the tip's package, which you can temporarily slide on the tip right before the OWB, in order to push the OWB a little futher down the 8mm hole, but then you have to take the washer out, before inserting the tip-side standard bearing, because the washer is not supposed to stay there during play.

As the diagram says, the side of the OWB which has a little arrow and writing on it should be pointing AWAY from the tip, for a left-handed player.



Hope this helps... 

[czyoyo]

The OWB WILL be tight. Don't worry, its normal.

[the Earl of Whirl]

Nice diagram, bAd!

[bAd]

Thank you Earl, but I was forgetting an important piece! 
You have to mount the inner bearing on the supplied adapter, in order for it to fit snugly on the tip's shaft, which has a smaller diameter to account for the OWB smaller hole...

This is the corrected diagram:


 

[topper777]

thank you all for your help. the diagram was helpful. i put one in my love and the other in my stb 2.0. they play like a dream. thank you maurizio!